loading
reading
writing
saving
searching
Lane Shark LS2 - $3,900 (Americus)
QR Code Link to This Post
Cutting width / cutting area of 44"
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
11 cutting Positions
The Lane Shark LS2 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
The Lane Shark LS2 weighs just under 450 lbs.
When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
NOT COMPATIBLE WITH SKID STEERS
LS2: Compatibility Specifications
Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
Hydraulic rear remotes* or third function. Must have a WR Long C-Flow component OR return direct to sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight of 3000 lbs
Minimum tractor width of 55 inches